Python Block with Vectors

This tutorial describes how the Python Embedded Block can be modified to accept vector inputs and outputs, and how the input_items vector indexing is different between vectors and streams.

The previous tutorial, Creating Your First Block, demonstrates how to create a Python block using the Embedded Python Block. The next tutorial, Python Block Message Passing describes how to send and receive messages using the Embedded Python Block.

Starting the Flowgraph

This tutorial uses vectors, please complete the Streams and Vectors tutorial before moving on.

Add the following blocks to the flowgraph:

• Signal Source
• Throttle
• Stream to Vector
• Embedded Python Block
• Vector to Stream
• QT GUI Time Sink
• Virtual Sink
• Virtual Source
• Variable

Modify the following block properties:

• Signal Source
  • Output Type: float
  • Frequency: 100
• Variable
  • Id: vectorLength
  • Value: 16
• Stream to Vector, Num Items: vectorLength
• Vector to Stream, Num Items: vectorLength
• Virtual Sink, Stream Id: sinusoid
• Virtual Source, Stream Id: sinusoid
• QT GUI Time Sink
  • Autoscale: Yes
  • Number of Inputs: 2

Connect the blocks according to the following flowgraph:

Accepting Vector Inputs and Outputs

The Embedded Python Block needs to be modified to accept vector inputs, produce vector outputs and change the data type to float. Double-click on the block to edit the source code.

Change example_param in the function definition to vectorSize:

def __init__(self, vectorSize=16):

Change the name:

name='Max Hold Block',

Define the input and output to be a tuple enveloped by a list:

in_sig=[(np.float32,vectorSize)],
out_sig=[(np.float32,vectorSize)]

Remove the self.example_param = example_param line.

Remove the multiplication by self.example_param:

output_items[0][:] = input_items[0]

The code should now look like the following:

Save the code (CTRL + S). Connect the Max Hold Block to the rest of the flowgraph:

Warning for Vector Length Mismatches

The Embedded Python Block has one quirk that other Out of Tree Modules do not have. Before a flowgraph can be run GRC checks to ensure all of the connected data types and vector sizes match. During this process the default value of vectorSize in the __init()__,

def __init__(self, vectorSize=16):

is used to define the size of the vectors for the input and output,

in_sig=[(np.float32,vectorSize)],
out_sig=[(np.float32,vectorSize)]

when determining if the flowgraph is correct. In this case since vectorSize=16, GRC will assume the input and output ports will be vectors with length 16, even if the parameter is passed in through the block properties!

• show examples of both types of mismatch

Warning! The flowgraph will show an error if the length of the vector in your block definition does not match the vector sizes of the other blocks! Since there is not a syntax error the Embedded Python Block will not report an error in the properties window. Instead the only indication of an error will be that the blocks will not connect:

• TODO: update this image

Indexing Vectors

Vectors add an additional dimension, represented as vectorIndex below, onto both input_items and output_items:

input_items[portIndex][vectorIndex][sampleIndex]
output_items[portIndex][vectorIndex][sampleIndex]

• TODO: put an image here

Creating Max Hold Function

The work() function needs to be modified to include the max hold function. Add a loop over all of the vectors in input_items[0]:

for vectorIndex in range(len(input_items[0])):

Calculate the max value of the vector:

maxValue = np.max(input_items[0][vectorIndex])

Loop over each of the input samples:

for sampleIndex in range(len(input_items[0][vectorIndex])):

Assign each output sample maxValue:

output_items[0][vectorIndex][sampleIndex] = maxValue

The code should look like the following:

Save the code (CTRL + S). Run the flowgraph. The output will now show a sinusoid and a sinusoid with a max-hold applied every 16 samples:

Multiple Vector Ports

The Max Hold Block will be modified to include a second vector input and output port.

Add the following blocks to the workspace:

• Noise Source
• Stream to Vector
• Vector to Stream
• Virtual Sink
• Virtual Source
• QT GUI Time Sink